Chemical Mixing Systems
Precision Metering Systems for chemicals and fertilisers. Typically the products are added one by one into the Handler where they are mixed with water ready for spraying
| |
Now, for the details…
PRECISION VENTURI METERING SYSTEM is a fully integrated, simple-to-use, high accuracy solution to optimize agricultural spray operations industry wide.
- Accurately meters 4 liquid products per recipe plus programmable flush between products and at end of recipe
- Configurable manual induction mode for dry products either before or after recipe run
- 32 Configurable product including volume totalization
- 20 Configurable Recipes and Names
- Product volume can be set in fluid ounces/pints/quarts/gallons or liters
- Volume can be set from 00.01 (unit) to 99.99 (unit) per acre
- Comes standard with high accuracy mass flowmeter independent of temperature variations and product densities eliminating the need for calibration using advanced 'Coriolis' technology
- Stand-alone nominal 12 Volt DC Solar charged power supply
- Integral 60 gallon induction tank for dry products with (optional) knife jug splitter and rinse
- Fills 1200 gallon sprayer tank in less than 6 minutes (4 products)
- Optimally sized 400 GPM pump driven by Honda engine with automatic start and stop
- Manual system test for system verification
- Optional monitoring by cellular of Ethernet connection
- Datalogging using removable high capacity SD cards or cellular connection
PRECISION METERING SYSTEM is a simple, accurate solution to enhance agricultural spray operations industry wide
- Up to 5 products plus flush per recipe
- 32 Configurable product including historization
- 20 Configurable Recipes and Names
- Product volume can be set in fluid ounces/pints/quarts/gallons or liters
- Volume can be set from 00.01 (unit) to 99.99 (unit) per acre
- 2 flowmeters: Electromagnetic meter for most products and paddle-wheel for oil-based products with up to 6 k factor
- Stand-alone nominal 12 Volt DC Solar charged power supply